The water supply is connected to the upper right part of the rear surface of the appliance. Remove the clip in the joint area. Hold the water supply connection and gently push the collet a to detach the water supply line as shown.
Disassembling/Assembling the Water Lines
b Collet c Tube d Insert line e Clip
Pull out the water supply lines f. Disconnect all the wire harnesses g. Unscrew the ground wire h.
Rotate the hinge lever i counterclockwise. Lift the top hinge j free of the hinge lever latch k.
When lifting the hinge free of the latch, be careful that the door does not fall forward.
Lift the door from the middle hinge pin and remove the door.
Place the door, inside facing up, on a nonscratching surface.