Door Reversal Instructions

The instructions here are for changing the door swing from a right to a left side hinge. If the door has been reversed, and it is necessary to change it back, use care when following these instructions. Some of the illustrations and the left/right references will be reversed, and you will need to read the instructions carefully.

• Open the door and remove the 2 decorative screws, 2 latch screws, and the latch on the catch side with a screwdriver. Save these for step 4.

  Warning

  • Be sure to support the weight of the door before removing the hinge screws.

  

• While supporting the door, remove the 2 screws on the door hinge. Remove the door.

  

• Turn the door upside down and line up the holes in the hinge with the holes on the opposite side of the cabinet. Reinstall the door with the screws removed in step 2.

  Warning

  • Be sure to support the weight of the door before inserting the hinge screws.

  

• Install the 2 decorative screws, the latch, and 2 latch screws removed in step 1 on the opposite side from which they were removed.

  

• Check that the door closes properly.