When moving the appliance away from the wall, be careful not to roll over or damage the power cord.
The appliance is heavy. Two or more people are necessary to move and install the appliance to prevent damage or injury.
Prior to use, ensure that you are connecting the appliance to a dedicated grounded electrical outlet rated for use with the appliance. It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.
Before use, the appliance must be properly installed as described in this manual. Electric shock can result if the appliance is not properly grounded.
Do not install the appliance where there may be a danger of the appliance falling. The appliance is not designed for use on transportations such as ship and airplane. Check with an authorized LG service centre for use under other special circumstances.
Do not tamper with controls.
Install the appliance where the floor is firm and level. The appliance may vibrate excessively and eventually fall if installed on an unstable surface, causing damage or injury.
Do not truck the appliance from the front side and keep the front side protected always. Failure to do so the tempered glass on the appliance may be broken.
Properly ground the appliance to conform with all governing codes and ordinances. Follow the details in the installation instructions.
Install and store the appliance where it will not be exposed to temperatures below freezing or exposed to the weather. Allow the appliance to warm to room temperature before use if it was delivered in winter or at sub-zero temperature.
Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.
To reduce the risk of electric shock, do not install the appliance in humid spaces such as a bathroom. Failure to follow this warning can cause death, serious injury, fire, electric shock, or product deformation or malfunction.
Remove all packing items and dispose of all shipping materials properly.
Connect to a properly rated, protected, and sized power circuit to avoid electrical overload. Improper power circuits can melt, creating electric shock and/or fire hazard.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.
Keep all packaging from children. Packaging material can be dangerous for children.
Do not install near another heat source such as a stove, oven or heater.
Do not place candles, smoking materials, or other flammables on top of the appliance.
Remove all protective vinyl film from the appliance.
The appliance shall be installed in accordance with national wiring regulations.