Checking the Water tanks

Check the water in the water tanks before use. The water supply tank must be filled with water before using the appliance. The appliance does not work without water. The water drain tank should be emptied before each use.

• Pull the handle of the tank forward and then take the tanks out of the appliance. Check water level of the tanks.

  

• Make sure the water supply tank is filled with water.

  • The full water supply tank can be used approximately four times, depending on the programmes used.

  • Use clean tap water or bottled water for best performance and longer product life. Do not use distilled water or reuse the water from the drain tank.

  • The first time the appliance is used, 2/3 of the water in the fully filled water supply tank is used. Less water is used in following programmes.

  Caution

  • Only use water when filling the water supply tank. Any other substance, such as detergent or fabric softener, may damage the appliance.

  • Use only clean tap water or bottled water. Foreign materials in the water may shorten the lifespan of the appliance.

  • Do not use distilled water. The water sensor may not work.

  • Do not reuse the water in the drain tank to fill the water supply tank.

• Make sure the water drain tank is empty.

• The drain tank will be filled after about three uses. The tank fills more quickly during styling programmes. The appliance does not work if the drain tank is full.

  • Some discolouration of the water drain tank may occur over time. This is normal and will not affect product performance.