Before cleaning or performing maintenance, disconnect the power supply and wait until the fan stops.
Cleaning Interval
If the appliance will not be used for an extended period of time, dry the appliance to maintain it in the best condition. Clean the appliance regularly to maintain optimal performance and to prevent possible breakdown.Dry the appliance in Fan mode for 3 to 4 hours and disconnect the power. There may be internal damage if moisture is left in the appliance's components.Before using the appliance again, dry the inner components of the appliance in Fan mode for 3 to 4 hours. This will help to reduce the odor generated from moisture.Air FilterThe feature may vary depending on the model type.TypeDescriptionIntervalIndoor unitClean the surface of the indoor unit using a soft, dry cloth.RegularlyHave a professional clean the condensate drain pan.Once a yearHave a professional clean the condensate drain pipe.Every 4 monthsReplace the wireless remote control batteries.Once a yearOutdoor unitHave a professional clean the heat exchanger coils and the panel vents. (Consult with technician.)Once a yearHave a professional clean the fan.Once a yearHave a professional clean the condensate drain pan.Once a yearHave a professional verify that all the fan assembly is firmly tightened.Once a yearClean the electrical components with compressed air.Once a yearTypeDescriptionIntervalAir filterClean with a vacuum or hand wash.2 weeksTriple filter*1Clean with a vacuum or brush.Every 3 monthsMicro dust filter*1Clean with a vacuum or brush.Once a monthIonizer (on some models)Use a dry cotton ball to reduce dust.Every 6 monthsAir Cleaning Filter Never use water that is higher than 104 8 (40 7) when you clean the filters. It may cause deformation or discoloration.Never use volatile substances when you clean the filters. They may damage the surface of the appliance.Do not wash the Micro dust filter with water, because the filter can be damaged (on some models).Do not wash the Triple filter with water, because the filter can be damaged (on some models).
Removing and Replacing the Air Filter
Do not bend the air filter, as it may break.Assemble the air filter properly to prevent dust and other substances from entering the appliance.Turn off the power to the appliance.Locate the knobs of the air filter on the top front of the appliance.a Knobsb Air FilterPull the knobs upward slightly and then lift the entire filter to remove it.Insert the hooks on the air filter into the slots on the back of the front panel.Push the hooks down until they click into place.To make sure the filter is assembled properly, press down along the entire front length of the filter.Turn off the power to the appliance.Open the front cover.Lift up both sides of the cover slightly.Holding the knobs of the air filters, pull them down slightly and remove them from the indoor unit.Insert the hooks on the air filters into the front cover.Check the side of the front cover to make sure that the air filters are assembled correctly.
Cleaning the Air Filter
Clean the air filter once every 2 weeks, or more if needed.Remove the air filter from the appliance.Clean the air filter with a vacuum cleaner or wash it with lukewarm water and a mild detergent.Dry the filter in the shade.Do not operate the appliance without the filter in place.
Cleaning the Air Cleaning Filter (On Some Models)
The number and location of parts may vary depending on the model of the appliance.Features may change depending on the model type.Turn off the power to the appliance.Remove the air filter from the indoor unit.Remove the air cleaning filter from the indoor unit.Clean the filter using a vacuum cleaner.Insert the air cleaning filter.Assemble the air filter.Check the side of the front cover to make sure that the air filter are assembled correctly.Turn off the power to the appliance.Remove the air filters from the indoor unit.Remove the air cleaning filter from the indoor unit.Clean the filter using a vacuum cleaner.Insert the air cleaning filter.Assemble the air filters.Check the side of the front cover to make sure that the air filters are assembled correctly.