Top > OPERATION > Control Panel > Control Panel Features

Control Panel Features

  1. Encendido/Apagado (Power) Button

    • Press the button to turn the appliance on. Press again to turn the appliance off.

      Note

      • Pressing the Encendido/Apagado (Power) button during a cycle will cancel that cycle, and any load settings will be lost.

  2. Cycle Selector Button

    • Press this button to select the desired cycle.

    • Once the desired cycle has been selected, the standard presets will appear in the display. These settings can be adjusted using the Cycle Modifier buttons at any time before starting the cycle.

  3. Inicio/Pausa (Start/Pause) Button

    • Press this button to start the selected cycle. If the appliance is running, use this button to pause the cycle without losing the current settings.

      Note

      • If you do not press the Inicio/Pausa (Start/Pause) button to resume a cycle within a certain time, the appliance turns off automatically and all cycle settings are lost.

  4. Extra Options and Functions / Cycle Modifier Buttons

    • Use these buttons to select the desired options for the selected cycle. Not all options are available for each cycle.

  5. Time and Status Display

    • The display shows the settings, estimated time remaining, options, and status messages for the appliance. When the appliance is turned on, the default settings in the display will illuminate.

Time and Status Display

  1. Flow Sense Indicator

    • The Flow Sense™ duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer. Maintaining a clean exhaust system improves operating efficiency and helps minimize service calls, saving you money.

  2. Clean Filter Reminder

    • The K indicator lights up at the beginning of the cycle to remind you to check the lint filter. It turns off when the Inicio/Pausa (Start/Pause) button is pressed.

  3. Cycle Status Indicators

    • Secado (Dry) lights up when the appliance is in the drying stage.

    • Enfriado (Cool) lights up when the appliance is in the cool down stage.

  4. _ lights up when the Anti Arrugas (Wrinkle Care) option is turned on.

  5. k lights up when the control panel is locked.

  6. f lights up when the appliance is connected to a home Wi-Fi network.

  7. Estimated Time Remaining

    • When a drying cycle is selected, the estimated drying time for the selected cycle is displayed. This time will change if you select extra options for the cycle.

    • The cycle time on Sensor Dry cycles may fluctuate as the appliance recalculates drying time for optimal results.