Top > TROUBLESHOOTING > Before Calling for Service > Error Messages

Error Messages

tE1 through tE7

TEMPERATURE SENSOR ERROR

Cause

Temperature sensor failure.

Solution

  • Turn off the appliance and call for service.

Ps

POWER ERROR

Cause

Power cord is connected incorrectly.

Solution

  • Check the connection of the power cord to the terminal block.

d8O, dGO, dGs

DUCT BLOCK ERROR

Cause

The duct work is about 80% - 95% blocked. (The error code is displayed for 2 hours only.)

Solution

  • Do not use the appliance until the exhaust system has been cleaned and/or repaired. Using the appliance with a severely restricted exhaust is dangerous and could result in a fire or other property damage.

  • Check the outside dryer vent while the appliance is operating to make sure there is strong airflow. If the exhaust system is extremly long, have it repaired or rerouted.

Cause

House exhaust system blocked.

Solution

  • Keep the area around the appliance clean and free of clutter. Check vent hood for damage or lint clogging. Make sure the area around the vent hood is clear.

[L

Control de Bloqueo (Control Lock) FUNCTION

Cause

The Control de Bloqueo (Control Lock) function is on to prevent anyone from changing programmes or operating the appliance.

Solution

  • Turn off the Control de Bloqueo (Control Lock) function in the control panel. See Control de Bloqueo (Control Lock) under Options and Extra Functions.