Water drips from nozzle when Ciclo de Vapor (Steam Cycle) starts.
This is normal.
This is steam condensation. The dripping water will stop after a short time.
Garments still wrinkled after Steam Fresh.
Too many or overly different types of garments in appliance.
Small loads of 1 to 5 items work best. Load fewer garments. Load similar types of garments.
Creases or pleats are gone from garments after Steam Fresh.
The function of this cycle is to remove wrinkles from fabric.
Use an iron to replace creases and pleats in garments.
Garments have static after using the Reducir Estática (Reduce Static) option.
This is normal.
The amount of static experienced will depend on the individual moisture level in the skin.
Garments are too damp or too dry after using the Reducir Estática (Reduce Static) option.
Correct drying options not selected.
Select the load weight manually before starting the Reducir Estática (Reduce Static) option.
Steam does not generate, but no error code is shown.
Water level error.
Unplug appliance and call for service.
Water drips from door during Ciclo de Vapor (Steam Cycle).
This is normal.
Condensation will normally form on the inside of the appliance door during steam operation. Some condensation may drip out the bottom of the door.
Steam is not visible during Ciclo de Vapor (Steam Cycle).
This is normal.
Steam vapor is difficult to see when the door is closed. However, condensation will normally form on the inside of the appliance door if the steam system is operating normally.
Drum does not turn during Ciclo de Vapor (Steam Cycle).
This is normal.
The drum is turned off so that the steam vapor remains in the drum. The drum will normally turn for about 2 seconds once a minute.
Cannot see steam vapor at the beginning of cycle.
This is normal.
Steam is released at different stages of the cycle for each option.
Odors remain in clothing after Steam Fresh.
Steam Fresh did not remove odor completely.
Fabrics containing strong odors should be washed in a normal cycle.