Unit Installation
With the aid of an assistant, slide the unit into the cabinet. Do not push on the controls or the finned coils. Reinstall the screws removed from the cabinet sides in step 1 of preparation of cabinet.
CautionThe unit is heavy. Use an assistant to help lift the unit and set it in place. Lifting and maneuvering the unit by yourself could result in injury.
Hold the unit firmly in place until the window frame is lowered to meet the top surface of the unit directly behind the upper guide. If the unit falls from the window, it could cause personal injury or property damage.
Cut the non-adhesive foam strip a to the proper length and insert it between the upper window sash and the lower window sash.
To prevent broken glass or damage to windows, on vinyl or other similarly constructed windows, attach the window locking bracket b with a type C screw c.
Vinyl
Wood
Connect the wire harness before assembling the front grille.
Attach the front grille to the cabinet by inserting the tabs on the grille into the slots on the front top of the cabinet. Push the grille in until it snaps into place.
Open and remove the inlet grille d from the product. Secure the front grille assembly with 2 type A screws e. Assemble the inlet grille to the front grille again.
After the air conditioner is installed, measure the curtain panel on each side and cut the adhesive-backed heatproof foam f to fit each panel. The size of the panels may differ. Remove the backing from the heatproof foam and attach the foam to the curtain panels.
NoteHeatproof foam improves the cooling capability of the air conditioner.
See the Electrical Data section for information on attaching the power cord to an electrical outlet.