Pull out lint filter.

Turn the net over and rinse in water.

Fit the filter to its original position. Press the filter until you hear a click sound.

Pull out the magic filter from the tub.

Open the back cover of the filter.

Pull out the inner filter.

Remove lint.

Rinse the filter with water.

Place the filter to the original location. Push the filter until a click sound is heard.

Press the upper and lower part of the filter and pull forward.

Remove lint and then wash out.

Press the upper part of overflow filter down and pull forward.

Open the lid and remove lint and then wash out.

Close the lid and then insert the lower part of the overflow filter into the wash tub and then press top part into original position.

Place the filter to the original position.

Lift up the area a of the overflow filter. Take out the rotation filter-C by pulling in the direction shown.

Pull the overflow filter forward from the wash tub.

Turn the net over and rinse in water.

Use a brush or your hand to remove all of the lints which has adhered to the overflow filter.

Insert the overflow filter back into the wash tub.

Insert the rotation filter-C back into the overflow filter.