Cleaning the Interior

Use a damp cloth to clean the surfaces of the door and wipe out crumbs between the door and the frame.Remove greasy spatters with a soapy cloth and then rinse and dry.Wipe spatters immediately with a wet paper towel, especially after cooking chicken or bacon.If steam accumulates inside or outside of the oven door, wipe the panels with a soft cloth.For stubborn soil, boil a cup of water in the oven for 2 to 3 minutes. Steam will soften the soil. To get rid of odors inside the oven, boil a cup of water with some lemon juice or vinegar in it.If some induction cleaners containing abrasives are used, the appearance of the product may be damaged.

Cleaning the Exterior

Clean the outside of the oven with soap and water.Rinse with clean water and dry with a soft cloth or paper towel.To prevent damage to the internal working parts of the oven, do not allow water to seep into the ventilation openings.The door and door seals should be kept clean. Use warm, soapy water to clean. Rinse off soap residue and dry thoroughly.Frequently wipe metal parts with a damp cloth.

Cleaning the Control Panel

Open the door to prevent the oven from accidentally starting.Wipe with a damp cloth followed immediately by a dry cloth.Press STOP/Clear after cleaning.

Cleaning the Accessories

Wash the glass tray and rotating ring in mild, sudsy water. For heavily soiled areas, use a mild cleanser and scouring sponge. Dry completely before use.The glass tray and rotating ring are dishwasher safe.Abrasive cleansers, steel wool pads, gritty wash cloths, some paper towels, and other abrasive surfaces can damage the control panel and the interior and exterior oven surfaces.

Cleaning the Grease Filters

Filters should be cleaned at least once a month or more often if needed.To remove, slide the grease filter back slightly and pull it downward.Soak grease filters in hot water and a mild detergent. Rinse well and shake to dry.Do not use ammonia or place in a dishwasher. The aluminum will darken.To reinstall, slide the filter in on the back side and push it upward to secure it.Do not operate the hood without the filters in place.