Top > INSTALLATION > Before Installing > Parts

Parts

Included Parts

Note

  • Depending on your ventilation requirements, you may not use all of these parts.

  1. Power cord clamp bushing (1ea): for the cord hole in a metal upper cabinet

  2. 1/4" x 2" lag screw (2ea): for wall stud holes

  3. 1/4" x 3" toggle bolts (2ea): for drywall holes

    Spring toggle heads (2ea): for the toggle bolts

  4. 1/4" x 3" bolts (2ea): for securing to the upper cabinet

  5. Tapping screws (2ea): for attaching the damper duct connector

  6. Power cord clamp (1ea) and dark-colored mounting screw (1ea): to hold the power cord

  7. Mounting plate (1ea): for supporting the microwave oven

  8. Back-draft damper: 2 pieces must be assembled as shown. (for roof venting or wall venting installation, not for room venting installation)

  9. Upper cabinet template (1ea)

  10. Rear wall template (1ea): 1 piece mounting plate only

Note

  • You need to install at least one lag screw into a 2" x 4" stud and three anchor bolts into the wall. The mounting area must meet the 150 lb. weight requirement.