Top > INSTALLATION > Before Installing > Tools and Materials

Tools and Materials

You will need the following tools and materials for the installation:

  1. Phillips screwdriver (for the screws)

  2. Flat blade screwdriver (for the toggle bolts)

  3. Small side cutters (nipper) or tin snips

  4. Measuring tape (metal preferred)

  5. Stud finder

  6. Plumb line

  7. Pencil

  8. Clear tape (for taping the templates to the wall)

  9. Saber saw (for cutting vent holes for roof or wall venting)

  10. Electric drill

  11. 3/8" and 3/4" wood drill bits

  12. 1/2" and 3/16" drill bits

  13. Keyhole saw (for the power cord hole)

  14. Duct tape

  15. Caulking gun and caulk

  16. Gloves

Note

  • If you have brick or masonry walls, you will need special hardware and tools.

  • The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft damper (shown in Parts section).

  • Wear proper gloves to protect your hands from injury.