Top > TROUBLESHOOTING > Before Calling for Service > Error Messages

Error Messages

dE1

DOOR ERROR

Cause

The door has been opened while the appliance is in operation or the appliance is being operated without the door being closed properly.

Solution

  • Close the door completely.

  • If dE1 is not released, call for service.

dE4

DOOR ERROR

Cause

Door switch detection is not working properly.

Solution

  • Unplug the power plug and call for service.

tE1 / tEz / tE4

TEMPERATURE ERROR

Cause

Temperature Sensor has malfunctioned.

Solution

  • Unplug the power plug and call for service.

FI

TEMPERATURE ERROR

Cause

The temperature inside the drum has risen suddenly.

Solution

  • Unplug the power plug and call for service.

FI

COMPRESSOR ERROR

Cause

The compressor has malfunctioned.

Solution

  • Unplug the power plug and call for service.

LE1

MOTOR LOCKED ERROR

Cause

The motor has stopped suddenly.

Solution

  • Check if the amount of clothes exceeds the maximum load capacity.

  • Unplug the power plug and call for service.

OE

DRAIN PUMP ERROR

Cause

The drain pump motor has malfunctioned.

Solution

  • Unplug the power plug and call for service.

1F

NONE LINT FILTER ERROR

Cause

The lint filter is not in the appliance.

Solution

  • Insert the lint filter.

Ps

VOLTAGE ABNORMALITY

Cause

Supply voltage is not correct.

Solution

  • Unplug the appliance. If error reoccurs, call for service.

CC

CONDENSER COVER ERROR

Cause

The appliance is being operated without the Inner Condenser cover.

Solution

  • Open the Outer Condenser Cover. Assemble the Inner Condenser Cover. If the error reoccurs, call for service.

CL

CHILD LOCK FUNCTION

Cause

The Child Lock function is on to prevent anyone from changing cycles or operating the dryer.

Solution

  • Turn off the Child Lock function in the control panel. See Child Lock under Extra Options and Functions.

[=] ~ ENd

Cause

This is how the anti crease option works.

Solution

  • Make sure that the anti crease option has been set. The option is designed to prevent creases that are formed when the clothes are not unloaded promptly after the drying cycle. When the option is set, the appliance runs for 10 seconds and pauses for 5 minutes. The option is works for up to 2 hours.

  • Press the Power button and unload the clothes.

d:rN

EMPTY WATER

Cause

Water container is full.

Solution

  • Empty water container in the sink.