Heating operation
The desired temperature can be controlled in the units of 1 7.
Set the desired temperature higher than the water temperature.
Water temperature is displayed on the default screen of the remote controller.
When the desired temperature is set lower than the water temperature, warm water doesn't come out.
If your unit is operating in heating mode and you press the [On/Off] button the heating operation will shut off.
In the heating operation, temperature setting range vary by model.
For R32 : You can select the desired temperature in the range of 15 7 ~ 651) 7.
For R410A : You can select the desired temperature in the range of 15 7 ~ 57 7.
When the E/heater is not used, the minimum temperature of the water temperature can be set from 34 7 to 20 7.
1) For R32 split 4,6kW Model : 55 7