Controlling desired temperature
You can easily control to the desired temperature.
In the main screen, press [L, M (left/right)] button to select the desired temperature category,and press [J, K(up/down)] button to set the desired temperature.
Mode | Description |
|---|---|
Room temperature | Room temperature setting is available when remote room air sensor (sold separately) is installed |
Room1 & Room2 temperature | Temperature of Room 1 and Room 2 can be set respectively, when 2nd circuit option is activated in installer mode. |
Leaving water temperature | If the desired temperature is lower than the water temperature, the heating is not performed. Set the desired temperature higher than the water temperature. |
DHW tank temperature | DHW tank temperature setting is available when DHW tank is installed. |
Water inlet temperature | This operation is changed to the temperature sensor only, the inlet temperature sensor, and temperature control logic is the same as the leaving water temperature operation. |
Room temperature + Water temperature | Room temperature setting is available when remote room air sensor (sold separately) is installed. If the desired temperature is lower than the water temperature, the heating is not performed. Set the desired temperature higher than the water temperature. |
The function can be activated according to the installer setting.
Room 1 = Circuit 2 = Mixing circuit
Room 2 = Circuit 1 = Direct circuit