Always ground the product.
There is a risk of electric shock.
Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
There is risk of fire or electric shock.
Do not use a multi outlet. Always use this appliance on a dedicated circuit and breaker.
There is risk of fire or electric shock.
For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. Do not disassemble or repair the product by yourself.
There is risk of fire or electric shock.
Always ground the product as per the wiring diagram. Do not connect the ground wire to gas or water pipes lightening rod or telephone ground wire.
There is risk of fire or electric shock.
Install the panel and the cover of control box securely.
There is risk of fire or electric shock due to dust, water etc.
Use the correctly rated breaker or fuse.
There is risk of fire or electric shock.
Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced.
There is risk of fire or electric shock.
For installation, removal or reinstall, always contact the dealer or an Authorized Service Center.
There is risk of fire, electric shock, explosion, or injury.
Do not install the product on a defective installation stand. Be sure that the installation area does not deteriorate with age.
It may cause product to fall.
Never install the unit on a moving base or a place from where it can fall down.
The falling outdoor unit can cause damage or injury or even death of a person.
When the product is soaked (flooded or submerged) in water, contact an Authorized Service Center for repair before using it again.
There is risk of fire or electric shock.
Be sure to check the refrigerant to the used. Please read the label on the product.
Incorrect refrigerant can prevent the normal operation of the unit.
Don't use a power cord, a plug or a loose socket which is damaged.
Otherwise it may cause a fire or electrical shock.
Do not touch, operate, or repair the product with wet hands.
There is risk of electric shock or fire.
Do not place a heater or other heating appliances near the power cable.
There is risk of fire and electric shock.
Do not allow water to run into electric parts. Install the unit away from water sources.
There is risk of fire, failure of the product, or electric shock.
Do not store or use or even allow flammable gas or combustibles near the product.
There is risk of fire.
Wiring connections must be secured tightly and the cable should be routed properly so that there is no force pulling the cable from the connection terminals.
Improper or loose connections can cause heat generation or fire.
Safely dispose off the packing materials. Like screws, nails, batteries,broken things etc after installation or service and then tear away and throw away the plastic packaging bags.
Children may play with them and cause injury.
Make sure to check that the power device is not dirty, loose or broken and then Turn on the power.
Dirty, loose or broken power device can cause electric shock or fire.
In unit the step-up capacitor supplies high voltage electricity to the electrical components. Be sure to discharge the capacitor completely before conducting the repair work.
An charged capacitor can cause electrical shock.
When installing the unit, use the installation kit provided with the product.
Otherwise the unit may fall and cause severe injury.
Be sure to use only those parts which are listed in the service parts list. Never attempt to modify the equipment.
The use of inappropriate parts can cause an electrical shock, excessive heat generation or fire.
Do not use the product in a tightly closed space for a long time. Perform ventilation regularly.
Oxygen deficiency could occur and hence harm your health.
Do not open the front cover or grille of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)
There is risk of physical injury, electric shock, or product failure.
If strange sounds, smell or smoke comes from product. Immediately turn the breaker off or disconnect the power supply cable.
There is risk of electric shock or fire.
Ventilate the product room from time to time when operating it together with a stove, or heating element etc.
Oxygen deficiency can occur and hence harm your health.
Turn the main power off and unplug the unit when cleaning or repairing the product.
There is risk of electric shock or fire.
Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit.
This could result in personal injury and product damage.
Take care to ensure that power cable could not be pulled out or damaged during operation.
There is risk of fire or electric shock.
Do not touch any electric part with wet hands. you should be cut power before touching electric part.
There is risk of electric shock or fire.
Do not touch refrigerant pipe and water pipe or any internal parts while the unit is operating or immediately after operation.
There is risk of burns or frostbite, personal injury.
If you touch the pipe or internal parts, you should be wear protection or wait time to return to normal temperature.
Otherwise , it may cause burns or frostbite, personal injury.
Do not touch leaked refrigerant directly.
There is risk of frostbite.
Make sure to install mixing valve (field supply). The mixing valve is setting the water temperature. The hot water temperature maximum values shall be selected according to the applicable legislation.
Do not heated to a temperature of more than provided by the product.
Otherwise, it may cause fire or damage of product.
This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial use by lay persons.
Do not step on the unit and do not put anything on it.It may cause an injury through dropping of the unit or falling down.
Use a vacuum pump or Inert (nitrogen) gas when doing leakage test or air purge. Do not compress air or Oxygen and Do not use Flammable gases. Otherwise, it may cause fire or explosion.
There is the risk of death, injury, fire or explosion.
The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
The appliance shall be stored in a room without continuously operating open flames (for example an operating gas appliance)and ignition sources (for example an operating electric heater).
The appliance shall be stored so as to prevent mechanical damage from occurring.(for R32)
Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid certificate from an industry-accredited assessment authority, which authorises their competence to handle refrigerants safely in accordance with an industry recognized assessment specification.(for R32)
Keep any required ventilation openings clear of obstruction.(for R32)
Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel shall be carried out under the supervision of the person competent in the use of flammable refrigerants. (for R32)
The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.(for R32)
The appliance shall be stored in a room without continuously operating open flames (for example an operating gas appliance)and ignition sources (for example an operating electric heater). (for R32)
The appliance shall be installed in accordance with national wiring regulations.