DHW Recirculation Schedule (For Split Indoor unit 5 Series, Hydrosplit 2-Pipe)
It is the function that can check the status of DHW recirculation timer (schedule) saved in the remote controller.
In the schedule list, select the DHW recirculation schedule status category, and press [OK] button to move to the daily schedule status detail screen.
You can check the set Timer time, period, and day of week.
DHW recirculation schedule can be set up to 4 times.
Select the timer information, and press [OK] button to move to the corresponding timer’s edit screen.
This function is not default.
It can be activated, after setting value in installer mode.
Description of each stage in Add schedule
Stage 1. Usage setting
It sets the use of the timer setting.
Select ‘Use’ to move on the next stage
Stage 2. Time setting setting
It sets the period to perform the timer.
The end time cannot be earlier than the start time.
Stage 3. Day of week setting
It sets the day of week to perform the timer.
You can select ‘Customize / Weekend / Weekday / Everyday’.
If you select ‘Not use’ again in stage 1 after completing the schedule setting, the timer does not work. but the setting value remains, and when selecting ‘Use’ again, the same setting value can be used.