Cleaning the Dust Bin and the Pre-filter
Cleaning the Dust Bin
Press the release button to open the cover on the product body. Remove the dust bin.
Lift the cover off of the dust bin.
Empty the dust bin into a waste container and rinse the bin and cover under cold, running water.
Dry the dust bin and cover completely in a well-ventilated area out of direct sunlight before reassembling.
Cleaning the Pre-filter
Clean the air guide tank and filters under cold, running water at least once a month to maintain product performance.
Open the cover on the product body, remove the dust bin, and lift out the pre-filter.
Clean the pre-filter under cold, running water.
Dry the pre-filter completely in a well-ventilated area out of direct sunlight before reassembling.
Assembling the Pre-filter and Dust Bin
Insert the filter in the product body.
Close the cover of the dust bin.
Align the ribs on the dust bin to the grooves on the product body and slide the dust bin in until it locks into place. Push the front end of the cover until it clicks into place.
To avoid odour, allow the filters to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.
To avoid damage to the vacuum cleaner, do not clean the parts using liquid chlorine bleach or oxygenated detergent.