Cleaning Pet Nozzle
Push the levers on either side toward the outside.
Open the cover and remove up the brush.
Remove any foreign objects (thread, hair) from the rotating brush or the inlet port.
To assemble the brush, slide one end into the notch at the side of the nozzle a and lower the brush into place. Close the cover.
Push the levers on either side toward the middle.
Caution
After turning off the vacuum cleaner, allow the nozzle and brush to cool before handling.
Do not block the air inlet of the nozzle with hands or other objects while opening the nozzle.
Do not touch the brush while the nozzle is attached to the appliance.