Cleaning Bedding Nozzle
Simple Cleaning
To vacuum dust, detach the bedding nozzle from the extension pipe and attach the crevice tool to the hose handle.
- Top
- Bottom
- Inside
If you can not remove dust inside the nozzle using crevice tool, remove the dust by hand.
Disassembling and Cleaning
Press the release button on the rear side of the bedding nozzle to separate the bottom plate.
Remove any foreign objects (thread, hair) from the inlet port.
Rinse only the bottom plate under cold, running water.
Straighten the punch bar on the lower section.
To assemble the bottom plate, insert the bottom plate into holes and push it to secure.
Do not soak the bedding nozzle in water. It may cause the vibrator to malfunction.
Emptying Dustbin
Turn the dustbin clockwise to remove it.
Waste the dust in the trash bag.
To assemble the dustbin, insert it and then turn it couterclockwise.
