Top > OPERATION > Using the Hot Mop Nozzle > Alarm and LED by Hot Mop Nozzle Condition

Alarm and LED by Hot Mop Nozzle Condition

When using the hot nozzle, check the operation status through the alarm and LED for each condition.

Nozzle Front LED

Battery Pocket LED

Condition

Alarm and LED by Condition

Off

Off

Vacuum cleaner power off

The nozzle front LED of the hot nozzle is on and the battery pocket LED turns off.

On

Off

Operating normal mop mode

The nozzle front LED of the hot nozzle is on and the battery pocket LED turns off.

Blinking

On

Preheating in the steam mode is in progress.

The nozzle front LED blinks with the preheating start alarm and the battery pocket LED is on.

On

On

Preheating is completed and steam operation is in progress.

With the preheating completion alarm, the nozzle front LED and the battery pocket LED are on.

On

Blinking

The steam mode is in use.

There is no water in the water tank.

An alarm will briefly chime and the battery pocket red LED will flash continuously for one minute before the hot nozzle turns off.

  • When using the normal mop mode, the battery pocket LED does not blink even if there is no water in the water tank.

On

Blinking

The steam mode is in use.

Low battery in the battery pocket

An alarm will briefly chime and the red LED on the battery pocket will continue to flash until the battery is flat. The red LED on the battery pocket will then turn off and the steam mode will no longer be working but the normal mop mode will continue to operate.

On

Off

The steam mode is in use.

Discharged battery in the battery pocket

The nozzle front LED is on and the battery pocket LED turns off.

  • The steam mode will no longer operate but the mop pads will continue to rotate.

On

Off

The steam mode is activated without attaching the mop pads.

The nozzle front LED is on and the battery pocket LED turns on and off immediately.

On

Off

The steam mode is in use.

The nozzle is tilted or lifted off.

The nozzle front LED is on and the battery pocket LED turns off.

On

Off

The steam mode is in use.

The nozzle has not moved for approximately 20 seconds.

The nozzle front LED is on and the battery pocket LED turns off.

Off

Off

The steam mode is in use.

The nozzle has not moved for approximately 1 minute.

The nozzle front LED and the battery pocket LED turn off.

Off

Off

The steam mode is in use.

The mop attachment plate stops spinning.

The nozzle front LED and battery pocket LED turn off.

On

Blinking rapidly

It malfunctions.

With the alarm, the battery pocket LED blinks rapidly