Installing the Cooktop Unit

• Visually inspect the cooktop for damage. Make sure all cooktop screws a are tight (see below for locations).

  

• Check and prepare the installation location.

  • See Dimensions and Clearances.

• Carefully lower the cooktop into the countertop cutout, making sure not to trap any wires.

  

  Note

  • Do not use caulking compound. The cooktop must be removable, should service be required.

• Attach the retainer brackets a to the bottom of the cooktop; then snug the bolts against the bottom of the countertop as shown.

  

  Note

  • The retainer brackets MUST be installed to meet local codes or, in their absence, with the National Electrical Code ANSI/NFPA No. 70, latest edition.

  

  1. Cooktop

  2. Countertop

  3. Bolt

  4. Retainer Brackets

  5. Type A Screw