Top > OPERATION > Using Wireless Remote Control > Using the Generator Mode Function (Optional)

Using the Generator Mode Function (Optional)

This function operate air conditioner under the previously set power consumption.

  • Turn the appliance on.

  • Press GEN MODE button.

    • ^ or { is displayed on some indoor units.

Note

  • It is not displayed on the remote control display.

  • This function is available with Cooling Mode.

  • This function is disabled when you press MODE or JET MODE button.

  • When using Generator Power Supply, air conditioner must use ‘Gen Mode’.(It may not operate properly in Normal Mode.)

  • When using Generator Power Supply, If there are many applications being used together, air conditioner may not operate properly for overload on Generator.

  • Generator should be maintained properly according to Manufacture’s Manual. Non properly maintained Generator may cause unexpected effect on air conditioner. (Engine Oil, Fuel Level and continuous usage time should be in Manufacturer recommended condition.)

  • Due to ‘Gen Mode’, inadequate cooling capacity.

  • ‘Gen Mode’ is memorized. (In case of restarting the Air Conditioner during ‘Gen Mode’. It operates ‘Gen Mode’ automatically.)

  • When using Generator Power Source, Outdoor Unit may operate the outdoor fan Automatically for protecting the Air Conditioner.