Adjusting and Levelling the appliance

• Position the appliance in the final location and check to make sure it is level.

  • All levelling feet must rest solidly on the floor. Gently push on the corners of the appliance to make sure that it does not rock from corner to corner. Make sure there are no gaps between the front levelling feet and the floor.

• Use the spanner (packaged with the appliance) to turn the levelling feet.

  • Unscrew the front feet to raise the appliance or screw in the feet to lower it. Rear levelling feet can be purchased and installed separately from your nearest Authorised LG Service provider. If you are unable to level the unit with the front feet. If purchased, fit the rear leveling feet by slightly tipping the appliance. Do not lay the appliance down to install or adjust the levelling feet.

  • Raise or lower the appliance using the levelling feet until the appliance is level from side to side and front to back.

    

  Caution

  • Make sure that all levelling feet(including the rear feet if fitted) are in firm contact with the floor. If the appliance is used without levelling it, it may fall, causing injury, damage, noise, vibration, or product malfunction.

  • Adjust the levelling feet only as far as necessary to level the appliance. Extending the levelling feet more than necessary can cause the appliance to vibrate.

• When the appliance is completely stable and all levelling feet are resting solidly on the floor, tighten the locking nuts a.