Using Various Settings
Settings
Press the ε Settings button.
Turn the knob to select the desired setting and press the 8 button.
Turn the knob to select or change the setting and press the 8 button to save the setting.
To return to the previous screen, press the Settings button again or press the N button.
If no action is taken for several minutes after pressing the Settings button, the display reverts to the previous screen.
- Detergent Amount / Softener Amount
Off: Turns off the ezDispense function for that compartment
Minimum: Decreases the default amount to minimum
Less: Decreases the default amount by 10%
Medium: Uses the default amount
More: Increases the default amount by 10%
Maximum: Increases the default amount to maximum
- Child Lock
Press and hold the 8 button for 3 seconds to deactivate this function.
Once this function is set, all buttons are locked except the Power button.
When the controls are locked, the Child Lock indicator lights up and the washing programme is shown on the display.
Turning off the power will not reset this function. You must deactivate this function before you can access any other options and functions.
- Pre Wash
- TurboWash
- Steam
- Fresh Care
- Cycle List Edit
Turn the knob to select the desired washing programme and press the 8 button to include or exclude washing programmes.
If a washing programme is added, a check mark is displayed by that programme.
If a washing programme is deleted, the check mark is not displayed by that programme.
Press the N button to save the washing programme list.
Some default programmes that cannot be deleted have their checkboxes disabled.
The order of washing programme in the list can be changed. Change the order of the washing programme in the list using More Settings > Cycle Optimization on the product or Cycle Optimization in the LG ThinQ application.
Turn the knob to adjust the dispense amount for the current cycle based on the fabric type and soil level.
Use this option to disable the controls. This function can prevent children from changing cycles or operating the appliance.
This option is recommended when washing a heavily soiled load.
Adding this option reduces the programme time but the similar washing results will be provided.
Adding this option helps provide better cleaning results.
Use this function when you will not be able to unload your clothes immediately after the washing programme ends.
Edit the list of washing programmes as desired.
More Settings
Press the ε Settings button.
Turn the knob to select the More Settings and press the 8 button.
Turn the knob to select the desired setting and press the 8 button.
Turn the knob to select or change the setting and press the 8 button to save the setting.
To return to the previous screen, press the N button.
- Wi-Fi Connection
- Cycle Optimization
On is the default setting.
Selecting Off retains the current list order.
- Use of Dispenser 2
Softener: Used as softener compartment
Link Detergents: Used as detergent compartment
- Default Det. Amount / Default Soft. Amount
- ezDispense Nozzle Clean
Before using the function, remove the ezDispense compartment, clean it, fill it with water and reassemble it in the dispenser drawer.
- Sound
- Language
- Smart Diagnosis
See the Smart Diagnosis section for more details.
- Factory Reset
Use to set up the Wi-Fi Connection. When Wi-Fi is turned on, the Wi-Fi icon appears in the display.
When activated, this feature organizes the washing programme list and options automatically based on your usage patterns.
Switches the softener compartment to a secondary detergent compartment for those who don't use liquid fabric softener.
Use this function to adjust the default detergent amount or default softener amount in 3 ml increments, within a range of 9 ml to 120 ml.
Use this function to periodically clean the ezDispense compartments or before changing the softener compartment to a detergent compartment.
Use this option to adjust the volume of the sound and turn the sound off.
Use this to change the language shown on the display.
Use this to help troubleshoot errors or malfunctions.
Select this to delete all the stored data and initialize settings.