Top > TROUBLESHOOTING > Before Calling for Service > ezDispense Error Messages

ezDispense Error Messages

Check det. Tank

Cause

The amount of liquid detergent in the detergent compartment did not decrease.

After putting the detergent into the detergent compartment, it was left for a long time and the detergent hardened.

Solution
  • Clean the detergent compartment thoroughly, fill it with liquid detergent, install it in the drawer, and run a wash cycle. If the error is displayed continuously, call for service.

No detergent

Cause

The automatic detergent injection function does not work properly.

Solution
  • Call for service.

Check soft. Tank

Cause

The amount of fabric softener in the liquid fabric softener or liquid detergent compartment did not decrease.

After putting the fabric softener into the liquid fabric softener compartment, it was left for a long time and the fabric softener hardened.

Solution
  • Clean the softener compartment thoroughly, fill it with liquid fabric softener, install it in the drawer, and run a wash cycle. If the error is displayed continuously, call for service.

No softener

Cause

The automatic softener injection function does not work properly.

Solution
  • Call for service.

Auto Dispenser 1 abnormality

Cause

The automatic dispenser 1 does not work properly.

Solution
  • Call for service.

Auto Dispenser 2 abnormality

Cause

The automatic dispenser 2 does not work properly.

Solution
  • Call for service.

Drawer open

Cause

The washer was operated without completely closing the drawer.

The drawer was opened during the washer operation.

Solution
  • Push the drawer completely closed. If the error is displayed continuously, call for service.