Removing/Assembling Drawers
Parts may be changed due to product improvement and may look different than shown in images.
Removing Drawers
Disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock.
Most cleaning can be done with the drawer in place; however, the drawer may be removed if further cleaning is needed. Use warm water to thoroughly clean.
Fully open the drawer.
If there are screws a on the sides at the back of the drawer, remove the 2 screws and set them aside. For models without screws, go to step 3.
Lift the front of the drawer until the stops clear the guides.
Remove the drawer.
Assembling Drawers
Place the drawer rails on the guides.
Push the drawer back until it stops.
Lift the front of the drawer, push it back until the stops clear the guides, and lower the front of the drawer.
If the drawer had screws, insert and tighten the 2 screws a on the sides at the back of the drawer.
Push the drawer to close it.