Cleaning the Lint Filters

Caution

Clean the lint filters in the proper way referring to the following instructions. Failure to do so, the lint that is accumulated on the heat exchanger may not be cleaned properly.
When the lint drops into the filter inlet, it may cause less efficient drying performance and increase of drying time.

Note

Unload all of the laundries from the appliance before pull out the lint filters.
Put the lint filters back in place after cleaning. If the lint filters are not in the appliance, you can not operate the appliance.
when cleaning the filters, the lint should be thrown in the trash and not washed through the drain in order to avoid spreading microplastics in the used water system.

Pull out the inner filter from the outer filter and then open the inner filter.
- Open the filter by unfolding it in the direction of the arrows.
Remove large clusters of lint by hand, then use a vacuum cleaner to clean remaining lint.
- Avoid using excessive force to prevent damaging the filter.
- Dry the filter completely if the filter is moist. Failure to do so, odour may occur in the appliance.
- Throw lint in the trash.
Insert the inner filter into the outer filter.

Remove large clusters of lint by hand, then use a vacuum cleaner to clean remaining lint.
- Avoid using excessive force to prevent damaging the filter.
- Throw lint in the trash.
Note
- Ensure the side of the filter is closed properly. Failure to do so, any lint accumulated on the filter may get into the appliance and may cause degradation of the drying performance.
- Dry the filter completely if it is moist. Failure to do so may result in odour in the appliance.
Insert the inner filter into the outer filter and close the outer filter.
Reinsert the lint filter set to the dryer.
Caution
- Do not load or remove any clothes when the lint filter is not in place. The clothes can drop into the filter inlet and it may cause the appliance to malfunction.