Cleaning the Dust Bin

Empty and clean the dust bin after every use.

• If the dust bin is completely full of dust or the filter is clogged, the suction power will be reduced.

• Remove the battery from the product body before cleaning the dust bin.

• Push down the Kompressor lever a several times to collect and compact the dust from the outside of the cyclonic mesh filter and the interior walls of the dust bin.

  • Foreign objects which become lodged in the cyclonic mesh filter may be difficult to dislodge with the Kompressor lever. Remove the cyclonic mesh filter and use the cleaning brush, etc. to clean it.

  

• Press the dust bin cover release button b to open the dust bin cover. Shake the dust bin to empty it.

  • Be careful as dust or foreign objects may spill out when opening the dust bin. Empty the dust bin into a wastebasket or where dust and foreign objects can be easily removed.

  • The dust bin can be wrapped in a plastic bag to contain the dust when emptying the dust bin.

    

  Warning

  • If the Kompressor lever does not slide down smoothly, foreign objects may be trapped between the dust bin and the cyclonic mesh filter. Clean the dust bin and cyclonic mesh filter to avoid product damage.

  • Do not force the Kompressor lever down if foreign objects are caught around the working plate of the Kompressor system. Doing so may cause product damage.

• Insert the crevice tool d into the cyclonic mesh filter c and turn it counterclockwise to remove the filter.

  

• Wash the cyclonic mesh filter under running water.

  • To avoid odour and the malfunction of the motor, allow the cyclonic mesh filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.

    

• Use the combination tool e to clean out dust or foreign objects inside the dust bin.

  • Do not wash the product body or motor with water.

  

• Turn the product body over and lift the Kompressor lever f up to clean the inside of the working plate with the cleaning brush, etc.

  • Do not push the Kompressor lever down hard. The working plate may be damaged.

  

• Turn the product body over again and shake it while pressing down the lever to remove the dust.

• Turn the product body over, lift the Kompressor lever f up, and clean the inside of the working plate with the cleaning towel.