Cleaning the Multi-Surface Nozzle

Clean the brush and roller heads before each use.

• If the brush contains foreign objects, the brush may not spin or a noise may occur during operation.

• Press the nozzle release button a to remove the nozzle from the extension pipe or product body.

  

• Turn the nozzle upside down and rotate the cover lock slot b counterclockwise.

  

• Pull the brush cover forward and pull the brush out.

  

• Attach the crevice tool to the product body and use the vacuum to remove foreign objects and dust from the brush and the bottom of the nozzle.

  

• Use a damp towel or cloth to remove any remaining foreign objects and dust from the brush and the bottom of the nozzle. Remove foreign objects, debris and hair from all Rollers of the nozzles using tweezers.

  • Use a wet towel or cloth to clean the rotating brush and nozzle.

    

• Slide the brush back into the nozzle and rotate the cover back into place. Turn the cover lock clockwise to lock the cover.