Reversing the door
You can reverse the door for your convenience.
Do not reverse the door while the appliance is stacked on a washing machine.
Before removing the hinge screws, have an assistant support the weight of the door. The door could fall on the floor due to the weight of the door.
For safety reasons, two or more people need to work together to reverse the door.
The appearance of the screws varies and the screws must be inserted differently depending on the position. Make sure the screw is properly selected before tightening.
Open the door and remove 2 screws on the door hinge a. After removing the screws, put the door down carefully from the cabinet b with the front side facing down to the floor.
WarningRemove the lower screw first. The door may fall on to the floor due to its weight and the door can be damaged.
Remove 8 screws on the hinge assembly c from the door.
There are 6 screws on the front and 2 screws on the side.
Remove the 3 screws from the door latch assembly d which is fixed between the door and the hinge assembly, and then remove the screw which is fixed on the door hook.
Swap the position of the hinge assembly c and the door latch assembly d and then tighten the screws in reverse order.
Tighten the screw in their proper position referring from steps 2 to 4.
Remove the door catch e from the appliance frame by removing 2 screws and then assemble them on the opposite side.
Remove the 2 decorative screws from the appliance frame and then assemble them on opposite side.
Install the door with the screws removed in step 1 and then check the door closes properly.
If you reversed the door, attach the sticker(MEZ68823002) enclosed with the manual onto the door glass, where the handle is located.