Installation Procedure
For safety reasons, installation procedure should be performed by two or more qualified service personnel.
The weight of the appliance and the height of the installation makes the installation procedure too risky for one person.
Incorrect installation can cause serious accidents.
Do not operate if the appliance is not properly stacked.
The stacking kit should be aligned depending on the depth of the washing machine. (When you open the door or look at the side of the washing machine, you can find the dimension information of your washing machine at the label.)
How to align LG stacking kit to the appliance | |
|---|---|
Type A | Type B |
550 mm 1 the depth*1 1 599 mm | 600 mm 1 the depth*1 1 650 mm |
 |  |
For Type A, it must be assembled with 550R or 550L on upper part.
For Type B, it must be assembled with 600R or 600L on upper part.
The depth of the washing machine
Place the appliance on the top of an LG front load washing machine.
Remove the 2 screws from the bottom of the rear cover on each side.
Align the LG stacking kit holes and the rear cover holes in a line.
In case of that the depth of the washing machine is 550 mm or more and 599 mm or less
In case of that the depth of the washing machine is 600 mm or more and 650 mm or less
Fasten the 2 screws that were removed earlier from the appliance to the stacking kit.
Use the 4 screws in the accessory box (16 mm) to assemble the washing machine rear cover and stacking kit.
The procedure for the opposite side will be the same.