Top > MAINTENANCE > Periodic Maintenance > Removing and Assembling the Oven Door

Removing and Assembling the Oven Door

Caution

  • The door is very heavy. Be careful when removing, lifting and replacing the door.

  • Do not lift the door by its handle. The handle is not designed to support the weight of the door when it has been removed from the oven.

  • Do not hit the glass with pots, pans, or any other object.

  • Scratching, hitting, jarring or stressing the glass may weaken its structure, causing an increased risk of breakage at a later time.

  • Do not close the oven door until all the oven racks are fully in place.

Removing the Oven Door

  • Fully open the door.

  • Lift up the hinge lock b and flip it towards the hinge arm c completely.

    1. Slot

    2. Hinge Lock

    3. Hinge Arm

  • Firmly grasp both sides of the door at the top.

  • Partially close the door to approximately 70 degrees d. If the position is correct, the hinge arms will move freely.

  • Lift and pull the door towards you until the hinge latches are completely loosened.

Assembling the Oven Door

  • Firmly grasp both sides of the door at the top.

  • Fully insert the hinge arms a into the slots b until the indentations c on the hinge arms rest on the bottom edges of the slots.

    1. Hinge Arm

    2. Bottom Edge of Slot

    3. Indentation

  • Slowly open the door fully. Make sure that the hinge arms are properly engaged in the slots.

  • Lift up the hinge lock e and flip it towards the oven d until it clicks into position.

  • Close the door.