You can use the extra options and functions on some programmes to customize the cycle.
Using Basic Options
When you need a wash+rinse+spin, spin only, rinse+spin, rinse only, wash+rinse, wash only cycle, these can be set manually.Press the Process button to select wash, rinse and spin options as desired.Press the POWER button.Press the Process button until the icon lights up.When you select a programme, the icon in front of each option lights up.Press the Water Level button to adjust the water level according to the amount of laundry.Add laundry into the drum.Press the START/PAUSE button to start the cycle(s). Add the detergent into the detergent dispenser and close the door.When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will not be drained out after the wash is completed. If you wish to drain the water, select a spin only cycle after the wash has completed.If a rinse only cycle is selected, the water supply is started after detecting the load and this cycle will start. However this cycle will start to supply water of the selected water level if there is already water in the drum.If you do not select or change the water level, the water level will be set automatically.
Setting
Use Child Lock function to disable the controls. This function can prevent children from changing programmes or operating this appliance.Once this function is set, all buttons are locked except the POWER button.When the controls are locked, CL and the remaining time are alternatively shown on the display during the wash while the child lock is engaged.Turning off the power will not reset this function. You must deactivate this function before you can access any other options and functions.Turn on the power.Press and hold the Program and Process buttons simultaneously for 3 seconds to activate this function.Turn on the power.Press and hold the Program and Process buttons simultaneously for 3 seconds to deactivate this function.When this function is deactivated, a beeper will sound and the remaining time for the current cycle will reappear on the display.
Manual Washing
When you need a rinse and spin, spin only, rinse only or wash only cycle, these can be set manually.Rinse and SpinSpin onlyRinse onlyWash only1s or tPress the POWER button.2l and pPress the Process button 2 times.pPress the Process button 1 time.lPress the Process button 3 times.kPress the Process button 5 times.3Press the Process button for 3 seconds to adjust the number of rinses.Press the Process button for 3 seconds to adjust the number of rinses.5uPress the START/PAUSE button to start the cycle(s).When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will not be drained out after the wash is completed. If you wish to drain the water, select a spin only cycle after the wash has completed.If a rinse only cycle is selected, the water supply begins after detecting the load and the cycle will start. However the water will still fill to the selected water level even if there is water already in the tub.If you do not select or change the water level, the water level will be set automatically.