Top > OPERATION > Using Wireless Remote Control > Cooling, Auto, Dehumidification, Heating, Fan Mode

Cooling, Auto, Dehumidification, Heating, Fan Mode

You can change the operating mode when the appliance is turned on.

  • Turn the appliance on.

  • Press the MODE button repeatedly to select the desired mode.

    Icon

    Description

    Cooling Mode

    Cool air blows from the air outlets.

    Auto Mode

    The product adjusts the airflow automatically.

    Dehumidification Mode

    This function removes moisture in indoor air.

    Heating Mode*1

    Warm air blows from the air outlets.

    Fan Mode

    This function circulates the air without heating or cooling it.

    *1

    This feature is only available on some models.

  • Press the a or b button to set the desired temperature.

    • Cooling Mode: Set the temperature from 18 \ to 30 \.

    • Heating Mode: Set the temperature from 18 7 to 30 7.

    • Auto Mode (Cooling only): Each press changes the temperature as follows: -2 & -1 & 0 & 1 & 2

      Code

      Description

      2

      Cold

      1

      A Little Cold

      0

      Maintain Room Temperature

      -1

      A Little Hot

      -2

      Hot

    • Auto Mode (Heat pump): Set the temperature from 18 7 to 30 7.

    • Dehumidification, Fan Mode: There is no temperature control.

    Note

    • Each press increases or decreases the temperature by 1 \.

Notes for Each Operation Mode

Cooling Mode

  • The cooling mode doesn't work if desired temperature is higher than room temperature.

    • If so, please lower the desired temperature.

    • 5 \ is proper for the difference between room and outside temperature.

    • When setting the desired temperature higher than room temperature, only ventilation wind is blow out instead of cooling wind.

Dehumidification Mode

  • In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and cooling mode to remove humidity effectively.

Auto Mode

  • You can use the FAN SPEED button during the auto mode.

  • You can change other operation mode manually during the auto mode.

Fan Mode

  • When running ventilation, compressor of AHU doesn't work.

  • Ventilation mode does not release cool wind but general fan.

    • Because it releases the wind that has no temperature difference from the room, it functions to circulate the inside air.

  • Natural wind based on chaos logic

    • For a fresher feeling than other fan speeds, press the Indoor Fan Speed Selector and set to chaos mode. In this mode, the wind blows like a natural breeze by automatically changing fan speed based on the chaos logic.

  • During Fan Mode

    • The outdoor compressor doesn’t work. Have a function to circulate the indoor as it sends out the air that doesn’t have much temperature difference with indoor.