Top > OPERATION > Using Wireless Remote Control > Special Functions

Special Functions

Auto Clean (On Some Models)

In Cooling and Dehumidification modes, moisture is generated inside the indoor unit. Use this function to reduce that moisture.

  • Turn the appliance on.

  • Press the FUNC. (Function) button repeatedly to select the Auto Clean function.

  • Press the SET/CLEAR button to set the function.

Note

  • Some functions cannot be used while the Auto Clean function is in operation.

  • If you turn off the appliance, the fan continues to run for 30 minutes to clean the inside of the indoor unit.

Energy Saving Cooling (On Some Models)

This function adjusts the desired temperature during the cooling operation to enhance the comfort of the user and improve the energy saving performance.

  • Turn the appliance on.

  • Press the FUNC. (Function) button repeatedly to select the Energy Saving Cooling function.

  • Press the SET/CLEAR button to set the function.

Smart Cleaning (On Some Models)

During the Smart Clean operation, a brush moves back and forth across the filter to clean it.

Auto Smart Clean Operation

If the accumulated operation time of the product exceeds 30 hours, the Smart Clean automatically starts when the indoor unit is turned off.

  • Press the FUNC. (Function) button repeatedly to select the Smart Clean function.

  • Press the SET/CLEAR button to set the function.

Note

  • If the accumulated operation time of the product exceeds 30 hours, the Smart Clean automatically starts when the indoor unit is turned off.

  • To stop this function, press the SET/CLEAR button again.

Manual Smart Clean Operation

You can also manually set Smart Clean function.

  • When the indoor unit stops, press the FUNC. (Function) button repeatedly to select the Smart Clean function.

  • Press the SET/CLEAR button to set the function.

Note

  • The cleaning process used in the Smart Clean function may vary by product.

  • To stop this function, press the SET/CLEAR button again.

Comfort Cooling (On Some Models)

This function cools until it reaches the set temperature and then automatically controls the cooling level as needed to maintain that temperature.

  • Press the FUNC. (Function) button repeatedly to select the Comfort Cooling function.

  • Press the SET/CLEAR button to set the function.