Model LRG3193
Press and hold Clock for 3 seconds. Then press the Clock key repeatedly to toggle through and change oven settings.
Model LRG3194
Press and hold Timer On/Off for 3 seconds. Then press the Timer On/Off key repeatedly to toggle through and change oven settings.
Model LRG3060, LRG3061
Press and hold Start Time for 3 seconds. Then press the Start Time key repeatedly to toggle through and change oven settings.
The Setting button allows you to:
set the hour mode on the clock (12 or 24 hours)
enable/disable convection auto conversion
adjust the oven thermostat
activate/deactivate the preheating alarm light
set the beeper volume
switch the temperature scale between Fahrenheit and Celsius
The control is set to use a 12-hour clock. To reset the clock to 24-hour mode, follow the steps below.
Model LRG3193, LRG3194
Press and hold the Clock button for 3 seconds (Model LRG3193).
Press and hold the Timer On/Off button for 3 seconds (Model LRG3194).
Press +/- to toggle between a 12-hour and 24-hour clock.
Press START to accept the change.
Model LRG3060, LRG3061
Press Settings once.
Press +/- to toggle between a 12-hour and 24-hour clock.
Press START to accept the change.
Model LRG3193, LRG3194
When Conv. Bake and Conv. Roast are selected, Convection Auto Conversion automatically converts the standard recipe temperature entered to a convection temperature by subtracting 25 ℉ / 14 ℃. This auto converted temperature shows on the display. For example, select Conv. Bake, enter 350 ℉, and 325 ℉ shows on the display after preheat.
Convection Auto Conversion is enabled by default. To change the setting, follow these instructions.
Press and hold the Clock button for 3 seconds. Press Clock repeatedly until Auto appears in the display(Model LRG3193).
Press and hold the Timer On/Off button for 3 seconds. Press Timer On/Off repeatedly until Auto appears in the display (Model LRG3194).
Press +/– to switch Auto Conversion on or off.
Press START to accept the change.
Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven thermostat yourself.
To begin, either raise or lower the thermostat 15℉ (8 ℃). Try the oven with the new setting. If the oven still needs adjustment, raise or lower the thermostat again, using the first adjustment as a gauge. For example, if the adjustment was too much, raise or lower the thermostat 10 ℉ (5 ℃). If the adjustment was not enough, raise or lower the thermostat 20 ℉ (12 ℃). Proceed in this way until the oven is adjusted to your satisfaction.
Press and hold the Clock button for 3 seconds. Press Clock repeatedly until AdJU appears in the display (Model LRG3193).
Press and hold the Timer On/Off button for 3 seconds. Press Timer On/Off repeatedly until AdJU appears in the display (Model LRG3194).
Press Settings repeatedly until AdJU appears in the display.
Set the number of degrees to adjust:
Press or press and hold the +/- buttons until the desired number of degrees appears in the display.
Press START to accept the change.
This adjustment does not affect the broiling or Self Clean temperatures. The adjustment is retained in memory after a power failure. The oven temperature can be increased (+) or decreased (-) as much as 35 °F or 19 °C.
Once the temperature is increased or decreased, the display shows the adjusted temperature until it readjusts.
When the oven reaches its set-temperature, the preheating alarm light flashes 5 times or until the oven door is opened.
You can activate or deactivate the preheating alarm light.
Press and hold the Clock button for 3 seconds. Press Clock repeatedly until PrE appears in the display (Model LRG3193).
Press and hold the Timer On/Off button for 3 seconds. Press Timer On/Off repeatedly until PrE appears in the display (Model LRG3194).
Press Settings repeatedly until PrE appears in the display (Model LRG3060, LRG3061).
Press +/- to turn the light on/off.
Press START to accept the change.
Press and hold the Clock button for 3 seconds. Press Clock repeatedly until Beep appears in the display (Model LRG3193).
Press and hold the Timer On/Off button for 3 seconds. Press Timer On/Off repeatedly until Beep appears in the display (Model LRG3194).
Press Settings repeatedly until Beep appears in the display (Model LRG3060, LRG3061).
Press +/– to select Hi, Lo or Off.
Press START to accept the change.
Set the oven temperature display to show either Fahrenheit (℉) or Celsius (℃) units. The oven defaults to Fahrenheit unless changed by the user.
Press and hold the Clock button for 3 seconds. Press Clock repeatedly until Unit appears in the display (Model LRG3193).
Press and hold the Timer On/Off button for 3 seconds. Press Timer On/Off repeatedly until Unit appears in the display (Model LRG3194).
Press Settings repeatedly until Unit appears in the display (Model LRG3060, LRG3061).
Press +/- to select F (Fahrenheit) or C (Celsius).
Press START to accept the change.