Top > MAINTENANCE > Cleaning > Removing/Assembling Lift-Off Oven Doors

Removing/Assembling Lift-Off Oven Doors

Note

  • Parts may be changed due to product improvement and may look different than shown in images.

Door Care Instructions

Most oven doors contain glass that can break.

Caution

  • Do not close the oven door until all the oven racks are fully in place.

  • Do not hit the glass with pots, pans, or any other object.

  • Scratching, hitting, jarring, or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.

Removing Doors

  • Fully open the door.

  • Lift up the hinge lock b and flip it towards the hinge arm d completely. Repeat on other side.

    Locked Position

    Unlocked Position

    1. Slot

    2. Hinge Lock

    3. Oven Frame

    4. Hinge Arm

  • Firmly grasp both sides of the door at the top.

  • Partially close the door to approximately 5 degrees a. If the position is correct, the hinge arms will move freely.

    1. about 5°

  • Lift and pull the door towards you until the hinge latches are completely loosened.

Assembling Doors

  • Firmly grasp both sides of the door at the top.

  • Fully insert the hinge arms a into the slots b until the indentations c on the hinge arms rest on the bottom edges of the slots.

    1. Hinge Arm

    2. Bottom Edge of Slot

    3. Indentation

  • Slowly open the door fully. Make sure that the hinge arms are properly engaged in the slots.

  • Lift up the hinge lock b and flip it towards the oven c until it clicks into position. Repeat on other side.

    Unlocked Position

    Locked Position

    1. Slot

    2. Hinge Lock

    3. Oven Frame

    4. Hinge Arm

  • Close the oven door.