Top > MAINTENANCE > Cleaning > Removing/Assembling Drawers

Removing/Assembling Drawers

Removing Drawers

Caution

  • Disconnect the electrical power to the range at the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury, death, or electrical shock.

Most cleaning can be done with the drawer in place; however, the drawer may be removed if further cleaning is needed. Use warm water to thoroughly clean.

  • Fully open the drawer.

  • Unscrew the screw a on the side at the back of the drawer.

  • Locate the glide lever on each side of the drawer. Push down on the left glide lever and pull up on the right glide lever.

    1. Lever

    2. Push down with finger

    3. Pull up with finger

  • Pull the drawer away from the range.

Assembling Drawers

  • Pull the bearing glides to the front of the chassis glide.

  • Align the glide on each side of the drawer with the glide slots on the range.

  • Push the drawer into the range until levers click (approximately 2 inches).

  • Insert and tighten the screws on the back of the drawer.

  • Pull the drawer open again to seat the bearing glides into position.