Cleaning the Filters

Clean the pre-filter and exhaust filter regularly and wash them in running water at least once a month to maintain the optimum suction power of the appliance.

• The frequency of cleaning depends on where and how often you use the product. Clean the filters more frequently if the appliance is used regularly or in areas with a lot of dust.

• Filters are consumables. Please purchase more filters from an authorized service center.

• Remove the battery from the product body.

• Rotate the exhaust filter a to the unlocked position b to separate it from the product body.

  

• Grip the exhaust filter cover c and the exhaust filter a using both hands and rotate the exhaust filter cover while pressing the PUSH button in order to separate it from the exhaust filter.

  

• Lift out the pre-filterd from the product body.

  

• Use the combination tool e to clean any dust off the motor.

  • Do not wash the motor with water.

    

• Clean the exhaust filter by brushing the dust off it regularly and wash it in running water at least once a month.

  • Do not remove the sponge filter attached to the exhaust filter when washing the exhaust filter. Otherwise, the sponge filter may be lost or damaged.

  • To avoid odor and the malfunction of the motor, allow the exhaust filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.

    

• Clean the pre-filter by brushing the dust off it regularly and wash it in running water at least once a month.

  • To avoid odor and the malfunction of the motor, allow the pre-filter to dry completely in a well-ventilated area out of direct sunlight for at least 24 hours before reassembling.

    

• Align the triangle f on the inside of the exhaust filter cover with the letter "H" g of the PUSH button on the exhaust filter.

  

• Push to insert the exhaust filter cover c into the exhaust filter a and rotate it to reassemble it and prevent it from falling out.

  

• Insert the clean, dry pre-filter and rotate the exhaust filter to the locked position f to reassemble it on the product body.