Top > MAINTENANCE > Cleaning > Cleaning the Air Filter (Glossy Type)

Cleaning the Air Filter (Glossy Type)

Warning

  • Wear gloves during the work.

  • Before cleaning or performing maintenance, disconnect the power supply and wait until the fan stops.

Caution

  • When you remove the air filter, do not touch the metal parts of the indoor unit. Doing so may cause an injury.

  • Do not bend the air filter, as it may break.

  • Assemble the air filter properly to prevent dust and other substances from entering the product.

Removing the Filter

  • Pull on both sides of the front grille to open it.

    • The arrows are marked on both sides of the front grille.

  • Push the knobs on the air filter to remove the filter.

  • Remove the PM1.0 filter by pressing the knobs on it.

    Warning

    • Don't touch the PM1.0 Filter within 10 seconds after opening the front grille.

      • It may cause an electric shock.

  • After pushing down the ring, remove the deodorization filter.

Cleaning the Air Filter

  • Clean the air filter with a vacuum cleaner or wash it with lukewarm water and a mild detergent.

  • Dry the filter in the shade.

Cleaning the PM1.0 Filter and Deodorization Filter

PM1.0 Filter

  • Soak the PM1.0 filter in enough water to submerge it and shake it several times to clean it.

    • Clean the filter without disassembling it.

    • If the filter is heavily soiled, soak it in lukewarm water with neutral detergent for 30 minutes, then rinse thoroughly with clean water.

  • Dry in the shade for about a day.

    • If you assemble the PM1.0 filter with moisture remaining, 7 beeps will sound.

Caution

  • Do not use hot water over 40 \ or volatile liquids.

  • Do not use acidic detergents such as citric acid.

  • Drying with a hot air heater, such as a hair dryer or a heater, could damage or deform the filter.

  • The inside of the filter is sharp, so do not rub or touch it directly.

Deodorization Filter

Do not wash the deodorization filter with water and dry for about 3 hours under weak sunlight or fluorescent light.

  • Washing the filter with water could damage or deform it.

Mounting the Filter

  • Pull down the ring and insert the deodorization filter.

  • Insert the PM1.0 filter.

  • Insert the air filter.

  • Close up the front grille and secure it by pushing the centre and both sides of the grille.

    • The arrows are marked on both sides of the front grille.