Using the Flexible Zone

This option adjusts the wash intensity to target different zones inside the dishwasher. Set it to wash just the upper rack or lower rack, or set the intensity to soft for the upper spray arm and strong for the lower spray arm.The Flex Zone is off by default. Press the Flex Zone button to customize settings.Press the Flex Zone button repeatedly to select one of the three modes.ModeDescriptionVarious conditionsPlace heavily soiled dishes like plates and bowls in the lower rack and lightly soiled dishes like cups and small plates in the upper rack to get the best results.Small loads & light soilUse just the upper rack to save energy and time.Small loads & heavy soilUse just the lower rack to save energy and time.

High Temp.

Raises the main wash temperature to improve cleaning.

Extra Dry

Select the Extra Dry option for better drying performance. This option adds extra drying time to the cycle and raises the heated rinse temperature.When the rinse aid is empty, the Extra Dry option is selected automatically.

Night Dry

Dishes are often left in the dishwasher overnight after the cycle ends. This can result in the steam inside the tub condensing on dishes, leaving them wet. This option runs the ventilation fan periodically to help vent the steam from the tub.The Night Dry option is selected by default for all cycles for which it is available, except the Normal cycle.

Delay Start

This feature delays the start of a selected cycle. Each time the Delay Start button is pressed, the delay time increases by an hour. The delay time can be set from 1 to 12 hours, in one-hour increments.

Remote Start

Use a smartphone to control your appliance remotely. You can also monitor your cycle operation so you know how much time is left in the cycle. Once this function is enabled, you can start a cycle from the smartphone application. If the door is not closed within 4 seconds after pressing Remote Start, Remote Start is canceled.

Cycle/Option Guide

The cycle guide below shows the available options for each cycle.CycleAutoNormalHeavyDelicateTurboSoil LevelAll levelsAll levelsHeavyLightLightWater Usage(L)13.2 - 17.39.2 - 22.823.916.628.8(gal) 3.5 - 4.62.4 - 6.06.34.47.6Wash Time with Options (Mins.)107 - 185109 - 170149 - 189110 - 13060 - 100Available OptionsHigh Temp.####Flex Zone###Extra Dry#####Night Dry#*##*#*#*Delay Start#####* Default settingActual water consumption will vary depending on soil level and hardness of water.The actual running time and cycle time displayed may change depending on options chosen, soil level, water temperature, and hardness of water. Therefore, display time and actual running time can be different.Options are not available for Download Cycle. The Machine Clean cycle is the default Download Cycle.

Using the Option Setting Mode

You can set various options by using the Option Setting Mode.Ensure the appliance is off.Press Power a and Remote Start b simultaneously to enter the Option Setting Mode.Refer to the table to set up each function.Press Start c to save.FunctionButtonDisplayMachine Clean ReminderNight DryOff & OnRinse Aid LevelExtra DryL2 ~ L3 ~ L4 ~ L0 ~ L1 ~ L2 ~Clean LightHigh Temp.On & OffChime SoundTurbo On & OffAuto SettingDelicateOn & OffEnd SoundHeavyOn & OffMachine Clean ReminderThe Machine Clean LED flashes every 30 cycles. You can activate or deactivate the LED.Rinse Aid LevelYou can adjust the level of rinse aid from L0 to L4.For more information, refer to the Rinse Aid Dispenser Adjustment section.Clean LightThe default ON setting keeps the green light on (on some models) and ENd display until the door is opened. If the setting is changed to OFF, the lights turn off after 90 seconds.Chime SoundYou can turn on/off the volume of the button sound or notification sound. The error alert sound cannot be turned off.Auto SettingThe default ON setting selects options automatically for better washing and drying performance.If the setting is changed to OFF, the options are not selected.End SoundYou can turn on/off the End sound.