Installation or repairs made by unauthorized persons can pose hazards to you and others.
The information contained in the manual is intended for use by a qualified service technician who is familiar with the safety procedures and equipped with the proper tools and test instruments.
Failure to read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.
The appliance shall be installed in accordance with national wiring regulations.
When the power cord is to be replaced, the replacement work shall be performed by authorized personnel using only genuine replacement parts.
This appliance must be properly grounded to minimize risk of electric shock.
Do not cut or remove the grounding prong from the power plug.
Attaching the earth wire to the power outlet cover screw does not ground the appliance unless the cover screw is metal, uninsulated, and the power outlet is grounded through house wiring.
If you have any doubt whether the air conditioner is properly grounded, have the power outlet and circuit checked by a qualified electrician.
The refrigerant and insulation blowing gas used in the appliance require special disposal procedures. Consult a service agent or a similarly qualified person before disposing of them.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.