Installing the Appliance
Remove the protective film from the decorative chimney and hood body.
Remove all metal grease filters using the handles provided. See MAINTENANCE chapter.
Fix the hood fixing bracket c at mark point (2) and the chimney fixing bracket a at mark point (1) with the wall plugs b and screws d to the wall. Install 2 wall plugs b on the wall for step 6.
b Wall Plugs (7 ea)
d Screws (Φ5 mm x 50 mm, 5 ea)
Fix the exhaust pipe (only for extraction-air mode) a and lower decorative chimney c on the main body, connect the chimney fixing bracket b and lower decorative chimney.
d Screws (Φ4.2 mm x 9.5 mm, 4 ea)
Fix the exhaust pipe in position using tapes. When installing the ducted version, connect the appliance to the chimney using either a flexible or rigid pipe Φ150 mm, the choice of which is left to the installer.
Hang the appliance on the hood fixing bracket.
After connecting the exhaust pipe securely, fix the chimney fixing bracket with 2 screws a with prepared wall plugs to prevent the appliance from accidentally sliding off the hood fixing bracket.
Screws (Φ5 mm x 50 mm, 2 ea)
Connect the power cord.
Fit the upper decorative chimney with the outlet grill at the top.
Screws (Φ4.2 mm x 9.5 mm, 2 ea)