Product
> Additional Functions > Use of Tripod

Use of Tripod

You can mount the product on a tripod. The tripod is an optional purchase.

28452.png

> CAUTION
  • • Extend the tripod legs as much as possible and tighten up the screw securely.
  • • Before connecting with the product, you must set up the tripod completely to prevent shaking.
  • • You should work together with two or more people when connecting the product and the tripod.
  1. a Unfold the tripod on a flat surface and then fix the tripod. Tighten up the tightening part of the tripod.

28435.png

28432.png

  1. b Open the tripod hole cup on the bottom of the product.

28423.png

28421.png 

  1. c Lift the product and connect the tripod to fixing part on the bottom of the product.

28412.png

28410.png 

28401.png

28391.png Note
  • • If you use a tripod, use the tripod only for product.
  • • Use tripod as below :
  • - From tripod’s center to tripod’s leg : above 700 mm
  • - From top of tripod to bottom of tripod : below 1100 mm
  • - Stand pole size : Φ 35 mm
  • • For safe use, set the tripod as low as possible.
  • • You should pull the center column to the maximum only in case of need.
  • • Mount only one product on each tripod.
  • • Do not try to extent the tripod legs beyond it’s allowed range.
  • • Make sure the tripod is correctly assembled and all its components are tightly connected.
  • • Do not try to assemble the tripod if parts are missing or defective.
  • • After installation, make sure the product is set up firmly on the tripod.
  • • Do not place the product on anything unstable where it might accidentally fall over.
  • • Add weight such as sand bags around the tripod legs to prevent the tripod from falling over.
  • • You should limit people around the product while its on a tripod. Otherwise it may result in an accident and may cause personal injury or property damage.
  • • Standing on the stool to reach product's control panel is risky and might lead to injuries.
  • • Do not put or attach other objects on the tripod.
  • • Do not shake or push the product when the tripod is installed.
  • • Refrain from moving around the tripod after product is installed.
  • • Remove all connected cables to the product on the tripod before moving the tripod or adjusting its height.
  • • When transporting or moving the product, always use two or more people.
  • • When you use the tripod, use an extension cord. Always be careful with the movement of the cable.
  • • Do not expose the product to excessive dust, vibrations, extreme cold or heat (such as in direct sunlight or near a heater) to prevent the possible disfigurement of the panel or damage to the internal components.
  • • When using the external input cable (Mic, etc.) after installing the product on the tripod, external input cable can cause the product to fall down.
  • • Watch out because people can trip over the input cable (Mic, etc.) connected the product.
  • • Always be careful not to trip over the product.

Safety Precautions