Wiping the Moisture Sensor
This device senses the moisture level of the clothes during operation, which means it must be cleaned once every six months to remove any build-up of lime scale on the surface of the sensor.Wipe the sensors inside the drum.Do not wipe the moisture sensor with abrasive materials. Always clean the sensor with a dry rough acrylic sponge.
Using Drum Clean Feature
With time and use, the appliance may form unpleasant odours that leave your clothes smelling after drying. Using this cleaning function once a month (or after drying 30 times) helps to reduce the unpleasant odours from the appliance.Remove all of the clothes from the appliance.Pull out the water container, empty the condensed water from it and refit the water container back into the appliance.Turn on the appliance.Press the Drum Care button.Press the Start/Pause button.This function operates for about 3 hours.Empty the water container after the function has finished.When the optional drain hose is installed, there is no need to empty the water container.Open the dryer's door to provide the appliance with enough air circulation for exhausting any remaining odours.For safety reasons, do not allow children or animals to enter the appliance. It may cause damage or injury.
Using Condenser Clean Feature
The appliance washes lint, which builds up onto the surface of the condenser, automatically using water that is condensed from the clothes during operation. Using this separate cleaning function once a month (or after drying 30 times) helps to wash the lint from the condenser and maintain optimal performance. Remove all of the clothes from the appliance.Pull out the water container and empty the water container.With the water container removed, pour 1 litre of clean water slowly into the entrance of the water container compartment.Then refit the empty water container into the compartment.Do not pour the water quickly as it will spill out.Pouring more that 1.0 litres of water into the compartment will cause water to leak back out.Turn on the appliance.Press and hold the Condenser Care button for 3 seconds.Press the Start/Pause button to start the cleaning of the condenser.The cleaning of the condenser proceeds for 1 hour.Empty the water container after the cleaning is finished.When the optional drain hose is installed, there is no need to empty the water container.Open the dryer's door to provide the appliance with enough air circulation for more thorough drying of the tub after the cleaning has ended.For safety reasons, do not allow children or animals to enter the appliance. It may cause damage or injury.
Cleaning the Condenser
This model is equipped with "Auto Condenser Cleaning". However, if you want to clean the condenser manually, follow the instructions in this manual.To avoid physical injury and burns, do not touch or clean the condenser with bare hands.When cleaning the condenser, be careful not to damage the fins.If drying performance deteriorates, open the condenser cover to check for foreign substances or lint build up.Press the top part of the access panel a to open it.Turn the locks b to release the condenser cover, and pull the cover to remove it.Clean the dust on the condenser using a vacuum cleaner or soft brush. Apply only gentle pressure and clean in a vertical direction so as not to damage the fins. Fit the cover with the hole below.Reinsert and reassemble the condenser cover completely.If the condenser cover is not completely reassembled, the product will not work properly and may leak onto the floor during operation.Close the access panel.