LAN

Using Wired LAN

LAN is installed with an automatic IP (DHCP) as default value.

Please refer to the following instructions to find out more about setting up an automatic IP (DHCP) or manual IP.

1. Connect the LAN adaptor to the micro USB port on the PC.

   Tip:

   Network cables equal to or above CAT5 are recommended for the best network environment.

   The network (LAN) cable may be connected when the LAN adaptor is used.

   The LAN adaptor may be separately purchased at LG Service Center.

   

2. Connect LAN cable to the LAN port.

   

3. On the Start Screen, click the Desktop tile to convert to the Desktop screen.

4. On the Desktop screen, run Charms.

   

5. In the Charms, click [Settings] > [Control Panel] > [View By] > [Small Icon] > [Network and Sharing Center].

   

6. Click [Change adapter settings].

   

7. Right-click [Ethernet] and select [Properties].

   

8. Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].

   

9. If you want to use an automatic IP(DHCP), select [Obtain an IP Address Automatically]. If you want to use a manual IP, select [Use Following IP Address] to enter the address.

   Please ask the network administrator about obtaining a manual IP.

   

10. Press [OK] to complete the network setup.

11. Click the [Internet Explorer] icon in the taskbar to check whether the internet is operating normally.