[Depending on model]
To connect to network
- Select NETWORK Network Setting.
- Sets IP Mode as IP Auto Setting or IP Manual Setting.
- IP Auto Setting : For broadband service.
- IP Manual Setting : For offices (fixed IPs).
- When selecting IP Manual Setting, type in the IP address.
- Click OK. The network is connected.
Warning when setting network
Use standard LAN cable (connect to Cat5 or higher with RJ45 connector, 10 Base-T, or 100 Base TX LAN port).
Resetting modem may cause network connection problems. Turn the power OFF, disconnect and reconnect it, and then turn the power on to solve the problem.
LG Electronics is not responsible for any Internet connection problems or any faults, malfunctions, or errors caused by Internet connection.
Network connection may not work properly depending on Internet service provider.
DSL service must use the DSL modem; and cable service must use the cable modem. Since only a limited number of Internet connections may be available, TV network setting may not be used depending on the contract with Internet service provider. (If the contract does not allow more than one device per line, only the already-connected PC may be used.)
Failure to turn off all local home networks may cause excessive traffic on some devices.
Invalid settings of network devices can cause TV to operate slowly or not operate properly. Install the devices correctly according to the appropriate manual and set network.