How to Use the Appliance
The minimum setting is at the end of the anticlockwise rotation of the control knob.
All operation positions must be selected between the maximum and minimum position.
The symbol e on the control panel, next to the control knob indicates the burner in operation.
Black Circle: Gas Off
Star: Ignition Position
Large Flame: Maximum Setting
Small Flame: Minimum Setting
- Automatic ignition with flame failure safety device (gas control)
- To ignite a burner:
Push the control knob of the burner that you wish to light and turn it anticlockwise to the maximum position.
If you keep the control knob holded down, the automatic ignition for the burner will operate.
You should hold down the control knob for 15 seconds after the flame on the burner has lit. If after 15 seconds the burner has not lit, stop operating the device and open the compartment door and/or wait at least 1 minute before attempting a further ignition of the burner.
After this 15-second interval, to regulate the flame you should continue turning the control knob anticlockwise until the flame is at a suitable level. The operating position must be at a position between the maximum and minimum position.
To switch the burner off, turn the control knob fully clockwise to the gas off position.
In case of power failure, the burners can be lit by carefully using a match.
The appliance is fitted with a flame failure safety device on each burner, which is designed to stop the flow of gas to the burner head in the event of the flame going out.